Sikafloor® DecoDur ES-26 Flake
Decorative Smooth Coloured Flake Epoxy Flooring System
Sikafloor® DecoDur ES-26 Flake is an epoxy coloured resin based decorative flake flooring system that can provide a hard wearing, seamless, low maintenance, smooth, scratch resistant glossy finish. Thickness 2,0 – 3,0 mm. Internal use.
- Decorative
- Seamless
- Good mechanical and scratch resistance
- Easy cleanability
- Low dirt pick up
- Low maintenance
- Waterproof
Usage
- Decorative resin flooring for:
- Pharmaceutical industry
- Life Science industry
- Health care industry
- Education facilities
- Retail industry
- Leisure facilities
Advantages
- Decorative
- Seamless
- Good mechanical and scratch resistance
- Easy cleanability
- Low dirt pick up
- Low maintenance
- Waterproof
Packaging
Refer to the individual Product Data Sheets
Colour
| Iceberg:
| Hiero:
|
| Noblesse:
| Amand:
|
| Framboise:
| Fleur de Tilleul:
|
| Blue Jean:
| Nougat:
|
| Mer du Nord:
| Bordeaux:
|
| Granit:
| Peche:
|
| Dune:
| Sanguine:
|
| Sable:
|
Appearance
Smooth gloss finish
System Details
APPROVALS / CERTIFICATES
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings
- Fire Testing EN 13501-1, Sikafloor® DecoDur ES-26 Flake, Exova, Classification report No. 2013-1866-K1-1
- Fire Testing ISO 9239-1, ISO 11925-2, Sikafloor® DecoDur ES-26 Flake, Exova, Test report No. 2013-1866-1
- Particle Emission, Biological Stress ISO 846, Sikafloor®-169/-DecoFiller/-304 W, CSM Fraunhofer, Certificate No. SI/1008-533
- Cleanroom Suitability Sikafloor®, Fraunhofer IPA, Report No. SI 1008-533
System Structure
Sikafloor® DecoDur ES-26 Flake system
| Layer | Product |
| 1. Primer | Sikafloor®-150/-151,-156, -160, -161 or -169 |
| 2. Wearing layer | Sikafloor®-263 SL /-263 SL N or -264/-264 N |
| 3. Broadcast coloured flakes to excess & Seal coat | Sika®-PVA ColorFlakes (3 mm) & Sikafloor®-169 |
| 4. Top coat | Sikafloor®-316 |
Composition
Epoxy
Nominal Thickness
~2–3mm
Shelf life
Refer to the individual Product Data Sheets
Storage conditions
Refer to the individual Product Data Sheets
Reaction to fire
Bfl-S1 | (DIN EN 13501-1) |
Chemical resistance
Sikafloor®-316 provides the chemical resistance. Refer to Product Data Sheet.
Skid / Slip Resistance
| R9 | (DIN 51130) |
Application
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
≤80 % max.
Dew Point
Beware of condensation.
The substrate and uncured applied floor material must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the surface of the applied product.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤4 % parts by weight
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Waiting Time / Overcoating
Before applying Sikafloor®-263 SL /-263 SL N or -264/-264 N on Sikafloor®-150/-151/-156/-160/-161/-169 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 36 hours | 4 days |
| +20 °C | 12 hours | 2 days |
| +30 °C | 8 hours | 1 day |
Before applying Sikafloor®-316 on Sikafloor®-169 allow:
| Substrate temperature | Minimum | Maximum |
| +10 °C | 30 hours | C4 days |
| +20 °C | 24 hours | 3 days |
| +30 °C | 6 hours | 2 days |
Before applying Sikafloor®-316, lightly abrade Sikafloor®-169 surface with a green Scotch-Brite™ pad to remove contamination and provide a non-glossy bonding surface or be prepared professionally with Kärcher RM 776 or Veroclean.
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied Product Ready for Use
Sikafloor®-169
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~48 hours | ~6 days | ~10 days |
| +20 °C | ~30 hours | ~4 days | ~7 days |
| +30 °C | ~20 hours | ~3 days | ~5 days |
Sikafloor®-316
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~20 hours | ~48 hours | ~10 days |
| +20 °C | ~16 hours | ~36 hours | ~7 days |
| +30 °C | ~12 hours | ~24 hours | ~5 days |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Consumption
Sikafloor® DecoDur ES-26 Flake (~2-3 mm)
| Layer | Product | Consumption |
| 1.Primer | 1–2 × Sikafloor®-150,-151,-156, -160, -161 or -169 | 1–2 × ~0,3–0,5 kg/m² |
| 2.Wearing layer | Sikafloor®-263 SL /-263 SL N or -264 /-264 N filled 1:1 with quartz sand (0,1–0,3m ) by weight | ~1,9 kg/m2 per mm |
| 3.Decorative Broadcast | Sika®-PVA ColorFlakes (3 mm) to excess | ~1,0 kg/m2 |
| First seal coat | 1 × Sikafloor®-169 | ~0,6–0,7 kg/m2 |
| Second seal coat | 1 × Sikafloor®-169 after lightly abrading the first seal coat | ~0,3 kg/m2 |
| 4.Top coat (Optional) | 1 × Sikafloor®-316 after lightly abrading the second seal coat | ~0,1–0,12 kg/m² |
These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level and wastage etc.
CLEANING
Refer to Sika® Method Statement: Sikafloor®-Cleaning Regime